Industrial channel IKR with plug-in channel drain
» Download product sheet (pdf)
| Channel model | P [mm] | AB [mm] | AT 7) | Fall | ET [mm] |
| IKR-070-150 | 70 | 150 | 60 | 0,6 % | |
| IKR-090-170 | 90 | 170 | 60 | 0,6 % | |
| IKR-120-200 | 120 | 200 | 60 | 0,6 % | |
| IKR-170-250 | 170 | 250 | 60 | 0,6 % | |
| IKR-220-300 | 220 | 300 | 60 | 0,6 % | |
| IKR-320-400 | 320 | 400 | 60 | 0,6 % | |
| IKR-420-500 | 420 | 500 | 60 | 0,6 % |
Calculation ET: AT + L1 x 0,006 [AT; ET; L1 in mm]
Material: 1.4301 (AISI 304), 1.4571 (AISI 316 Ti)
Floor connection (optional)
Channel drain 6) – vertical – two-part
| Model | DN | Ø d [mm] | diag. B [mm] | Ø D [mm] | H [mm] | to IKR-... | from IKR-... |
| RBE H-070-E-S | 70 | 75 | 180 | 153 | 129 | 70-150 | - |
| RBE H-100-E-S | 100 | 110 | 246 | 218 | 178 | 120-200 | - |
| RBE H-150-E-S | 150 | 160 | 310 | 283 | 209 | 170-250 | - |
 |
|||||||
Channel drain 6) – horizontal – two-part
| Model | DN | Ø d [mm] | diag. B [mm] | Ø D [mm] | H [mm] | HRS [mm] | to IKR-... | from IKR-... |
| RBE H-070-E-W | 70 | 75 | 180 | 153 | 160 | 142 | 70-150 | - |
| RBE H-100-E-W | 100 | 110 | 246 | 218 | 178 | 167 | 120-200 | - |
| RBE H-150-E-W | 150 | 160 | 310 | 283 | 233 | 217 | 170-250 | - |
 |
||||||||
Channel drain 6) – vertical – two-part
| Model | DN | Ø d [mm] | Ø D [mm] | H [mm] | to IKR-... | from IKR-... |
| RBE H-070-S | 70 | 75 | 153 | 129 | - | 170-250 |
| RBE H-100-S | 100 | 110 | 218 | 178 | - | 220-300 |
| RBE H-150-S | 150 | 160 | 283 | 209 | - | 320-400 |
 |
||||||
Channel drain 6) – horizontal – two-part
| Model | DN | Ø d [mm] | Ø D [mm] | H [mm] | HRS [mm] | to IKR-... | from IKR-... |
| RBE H-070-W | 70 | 75 | 153 | 160 | 142 | - | 170-250 |
| RBE H-100-W | 100 | 110 | 218 | 178 | 167 | - | 220-300 |
| RBE H-150-W | 150 | 160 | 283 | 233 | 217 | - | 320-400 |
 |
|||||||
6) further nominal widths on request
7) if no data is given the initial depth AT is at least 60 mm
Description for use in tenders:
Industrial channel, Model IKR, edge protection and internal grate support edge reinforced with rectangular stainless steel profile, the outer rectangular profile is 50 mm high to enable a better join. With wall anchors every 500 mm all round and U-shaped assembly supports for force-fit inlet rim connection and adjustable height dowel installation feet every 1,000 mm. Fall 0.6%. Channel available welded, not flanged, with welded attachment piece / underwelded plug-in adapter. Surface grain blasted.
Product tenders
We post our product tenders on Heinze, the information platform for construction products.
» Product tenders on heinze.de
