Industrial channel IKR with welded/underwelded channel drain
» Download product sheet (pdf)
Channel model | P [mm] | AB [mm] | AT 7) | Fall | ET [mm] |
IKR-070-150 | 70 | 150 | 60 | 0,6 % | |
IKR-090-170 | 90 | 170 | 60 | 0,6 % | |
IKR-120-200 | 120 | 200 | 60 | 0,6 % | |
IKR-170-250 | 170 | 250 | 60 | 0,6 % | |
IKR-220-300 | 220 | 300 | 60 | 0,6 % | |
IKR-320-400 | 320 | 400 | 60 | 0,6 % | |
IKR-420-500 | 420 | 500 | 60 | 0,6 % |
Calculation ET: AT + L1 x 0,006 [AT; ET; L1 in mm]
Material: 1.4301 (AISI 304), 1.4571 (AISI 316 Ti)
Floor connection (optional)
Channel drain 6) – vertical – welded – single-part
Model | DN | Ø d [mm] | diag. B [mm] | Ø D [mm] | H 9) [mm] | to IKR-... | from IKR-... |
RBE DRS-070-E-S | 70 | 75 | 180 | 153 | 280 | 70-150 | - |
RBE DRS-100-E-S | 100 | 110 | 246 | 218 | 300 | 120-200 | - |
RBE DRS-150-E-S | 150 | 160 | 310 | 283 | 355 | 170-250 | - |
Channel drain 6) – horizontal – welded – single-part
Model | DN | Ø d [mm] | diag. B [mm] | Ø D [mm] | H 9) [mm] | HRS 9) [mm] | to IKR-... | from IKR-... |
RBE DRS-070-E-W | 70 | 75 | 180 | 153 | 265 | 247 | 70-150 | - |
RBE DRS-100-E-W | 100 | 110 | 246 | 218 | 300 | 289 | 120-200 | - |
RBE DRS-150-E-W | 150 | 160 | 310 | 283 | 365 | 349 | 170-250 | - |
Channel drain 6) – vertical – underwelded – single-part
Model | DN | Ø d [mm] | Ø D [mm] | HU [mm] | to IKR-... | from IKR-... |
RBE DRS-070-S | 70 | 75 | 153 | 161 | - | 170-250 |
RBE DRS-100-S | 100 | 110 | 218 | 195 | - | 220-300 |
RBE DRS-150-S | 150 | 160 | 283 | 235 | - | 320-400 |
Channel drain 6) – horizontal – underwelded – single-part
Model | DN | Ø d [mm] | Ø D [mm] | HU [mm] | HRS [mm] | to IKR-... | from IKR-... |
RBE DRS-070-W | 70 | 75 | 153 | 161 | 143 + ET | - | 170-250 |
RBE DRS-100-W | 100 | 110 | 218 | 195 | 184 + ET | - | 220-300 |
RBE DRS-150-W | 150 | 160 | 283 | 276 | 260 + ET | - | 320-400 |
6) further nominal widths on request
9) valid when ≤ ET 100 mm; when ET > 100 mm H and HRS increase correspondingly
Description for use in tenders:
Industrial channel, Model IKR, edge protection and internal grate support edge reinforced with rectangular stainless steel profile, the outer rectangular profile is 50 mm high to enable a better join. With wall anchors every 500 mm all round and U-shaped assembly supports for force-fit floor connection and adjustable height dowel installation feet every 1,000 mm. Fall 0.6 %. Channel available welded, not flanged, with welded / underwelded channel drain. Surface grain blasted.
Product tenders
We post our product tenders on Heinze, the information platform for construction products.
» Product tenders on heinze.de